How to Use
Download the complete how to use brochure here.
Vacuum area thoroughly.
Prepare the machine:
Remove top dirty water tank. Remove the bottom clean water tank and fill with two capfuls of BISSELL cleaning formula and hot tap water. Place tanks back onto the machine.
Plug machine into an outlet and turn on. While pressing the trigger, slowly make one wet forward and backward pass with the machine. Release the trigger and make one dry forward and backward pass. Repeat passes until solution being pulled up appears clean. Continue this process around your room until entire room has been cleaned. The flow indicator will stop spinning to let you know it’s time to empty the dirty water and refill the clean water tank.
Clean the Machine:
When you have finished cleaning, empty and rinse both the dirty and clean water tanks. Check the bottom of the machine and remove any hair or debris from the brush roll area. You may be charged a cleaning fee at the retailer if you return the machine without completing this step.
If you have any additional questions visit our Frequently Asked Questions or Contact Us.